七彩虹bios升級工具(EFI Bios Windows界面刷新工具)適用于 xp/vista/win7 for 32bit

英特爾睿頻加速技術是英特爾酷睿 i7/i5 處理器的獨有特性，也是英特爾新宣布的一項技術。這項技術可以理解為自動超頻。當開啟睿頻加速之后，CPU會根據當前的任務量自動調整CPU主頻，從而重任務時發揮最大的性能，輕任務時發揮最大節能優勢。

AFUDOS <BIOS ROM File Name> [Option 1] [Option 2]
Or
AFUDOS <Input or Output File Name> <Command>
Or
AFUDOS <Command>

BIOS ROM File Name
The mandatory field is used to specify path/filename of the BIOS ROM file with extension.

Commands
The mandatory field is used to select an operation mode.
- /O Save current ROM image to file
- /U Get and display ROM ID from BIOS ROM file
- /S Refer to Option: /S
- /D Verification test of given ROM File without flashing BIOS.
- /A Refer to Option: /A
- /CLNEVNLOG Refer to Option: /CLNEVNLOG

Options
The optional field used to supply more information for flashing BIOS ROM. Following lists the supported optional parameters and format:
- /P Program main bios image
- /B Program Boot Block
- /N Program NVRAM
- /E Program Embedded Controller block if present
- /K Program all non-critical blocks and ROM Holes
- /Kn Program n'th non-critical block or ROM Hole only (0>= n <=7)
- /Q Quiet mode enable
- /REBOOT Reboot after update BIOS done
- /X Do not check ROM ID
- /S Display current system's BIOS ROM ID
- /R Preserve all SMBIOS structures during programming.
- /Rn Preserve SMBIOS type N during programming.
- /ECUF Update EC BIOS when newer version is detected.
- /Shutdown Shutdown after programming.
- /HOLE: Upate sepcific ROM Hole according to RomHole GUID.
- /HOLEOUT: Save specific ROM Hole according to given GUID.
- /SP Preserve Setup setting.
- /EC Program Embedded Controller Block.(Flash Type)
- /MEUF Program ME Ignition Firmware Block.
- /ME Program ME Entire Firmware Block.(only support DOS and WinPE platform)
- /CAF Compare ROM file's data with Systems is different or not, if not then cancel related update.
- /A Oem Activation file.
- /CLNEVNLOG Clear Event Log.

Rules
- Any parameter encolsed by < > is a mandatory field.
- Any parameter enclosed by [ ] is an optional field.
- <Commands> cannot co-exist with any [Options].
- Main BIOS image is default flashing area if no any option present.
- [/REBOOT], [/X], and [/S] will enable [/P] function automatically.
- If [/B] present alone, there is only the Boot Block area to be updated.
- If [/N] present alone, there is only the NVRAM area to be updated.
- If [/E] present alone, there is only the Embedded Controller block to be updated.